Skip to content
Same-day and next-day appointments in most areas.
Specialized KitchenAid repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

KitchenAid Wall Oven F05 and F5E0 / F5E1 / F5E2 Codes

Error code F05 / F5E0 / F5E1 / F5E2
Appliance Wall Oven
Quick answer

These four codes share a KitchenAid explanation about the door latch assembly, the door switch or their wiring.

Model compatibility: KitchenAid reuses codes across series and model years, so F05 / F5E0 / F5E1 / F5E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Possible door latch assembly, door switch or wiring problem on a wall oven.

On a KitchenAid wall oven, the codes F05, F5E0, F5E1 and F5E2 all relate to the latching hardware of the door. The manufacturer’s wording matches across them.

At a glance

Code F05 / F5E0 / F5E1 / F5E2
What it means Possible door latch assembly, door switch or wiring problem on a wall oven.
What you can check Do only the reset: breaker off, wait a minute, breaker on, then watch the display for a minute and check that the oven runs. Do not adjust or force the door.
When to call a technician If the code stays after the reset, a technician should look at the latch, switch and wiring. Say whether it appeared right away or after the door was used.

Side-by-side

Code KitchenAid says
F05 Door latch assembly, door switch or wiring
F5E0 Identical
F5E1 Identical
F5E2 Identical

No explanation is offered for why a given oven would show one instead of another.

Questions and answers

What are the parts? By the manufacturer’s wording, there may be a problem with the door latch assembly, the door switch, or the wiring tied to them. As general descriptions, the latch assembly holds the door shut when needed and the switch lets the control know where the door is. KitchenAid itself does not describe them.

What can I do? Only the reset: breaker off, a minute of waiting, breaker on, a minute of watching the display, then a check that the oven runs.

Can I adjust the door? The article does not suggest adjusting or forcing it, and it describes no inspection by the owner.

Code still present

Technicians handle latch and switch trouble once the reset has not worked.

Other door entries

Oven door service in our metro areas

Call (844) 919-2035 if a door-latch code stays. We work in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Name the exact code and note whether it came on right away or after the door was used.

Source: KitchenAid Product Help, Wall Oven: Error Code or Message

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your KitchenAid appliance?

Book a specialist visit for a clear estimate and approval before any repair.

References

Sources & references

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fields marked with * are required.

Call Book a Repair