KitchenAid Wall Oven Code F3E0: Upper Oven Temperature Sensor
F3E0 names the upper oven's temperature sensor, the oven control or the wiring. Try the breaker reset, then call if it stays.
Model compatibility: KitchenAid reuses codes across series and model years, so F3E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid names the upper oven temperature sensor, the control or the wiring as the possible problem.
F3E0 is the code that names the upper oven. The possible trouble, KitchenAid says, is that cavity’s temperature sensor, the oven control, or the wiring between them.
At a glance
| Code | F3E0 |
|---|---|
| What it means | KitchenAid names the upper oven temperature sensor, the control or the wiring as the possible problem. |
| What you can check | Turn off the oven breaker for a full minute, switch it on and stay nearby for another minute to see if F3E0 comes back. Leave the cavity's internal parts alone. |
| When to call a technician | If F3E0 reappears after the power cycle, book a service visit. A technician can test the sensor and connections to find which part is at fault. |
Why a sensor matters
A temperature sensor is, in general, a small probe inside the cavity. The control relies on its reading to know how hot it is, and turns the heat on and off to match the temperature that was set. When the reading is not clean, the control cannot keep the temperature steady and raises a code in place of it.
The three candidates are listed without ranking: sensor, control, wiring.
Owner step
Switch off the circuit breaker for the oven and wait a full minute. Switch it on, then stay by the oven for another minute to see whether F3E0 shows up again. Finally, confirm that the oven works properly. That is all KitchenAid provides, and it gives no instructions for looking at the sensor, so do not touch the cavity’s internal parts.
When F3E0 comes back
If the code reappears, the power cycle did not clear it, and the manufacturer then refers you to service. Testing the sensor and the connections is how a technician would find out which of the three is the actual cause.
Related codes
- F3E1 and companions: the lower oven’s sensor, with the same style of message.
- F01, F02, F1, F2: oven temperature sensor wording on other layouts.
Upper oven repair in our service metros
Phone (844) 919-2035 for KitchenAid wall oven repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Mention F3E0 and whether the upper oven is affected, and keep the model number nearby. Our oven repair page gives further detail.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.