F8E2 and F8E3 both refer to the oven cooling fan or its wiring; reset the breaker first.
Model compatibility: KitchenAid reuses codes across series and model years, so F8E2 / F8E3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Possible problem with the Oven Cooling Fan or its wiring.
Both F8E2 and F8E3 appear in KitchenAid’s wall oven articles with the same sentence: the oven cooling fan or the wiring tied to it may be at fault. Practically, they count as a single fault.
At a glance
| Code | F8E2 / F8E3 |
|---|---|
| What it means | Possible problem with the Oven Cooling Fan or its wiring. |
| What you can check | Shut off the circuit breaker for the oven for a minute and then restore it. Keep watch for a further minute to see that the code stays away, and confirm the oven behaves normally. |
| When to call a technician | If the code stays, the reset has not solved it. Expect a service visit, because homeowners should not go into a wall oven for the fan. |
The articles’ wording
The reason for having two numbers is not given. Neither of them brings up an airflow restriction, which the upper and lower fan entries do.
Reset sequence
Shut off the circuit breaker for the oven for a minute and then restore it. Keep watch for a further minute to see that the code stays away, and confirm the oven behaves normally.
What it means if the code stays
Then the reset has not solved the matter, and the area named is the fan and its wiring. Expect a service visit; homeowners should not go into a wall oven for the fan, and nobody should open it before it is disconnected.
Check the display first
If your display names the upper or the lower fan, use one of these instead:
| Code | Named in the code |
|---|---|
| F8E0 | Top cavity fan, or restricted air |
| F8E1 | Bottom cavity fan, or restricted air |
Fan repair across our metro areas
For KitchenAid wall ovens in the Miami, New York, Houston, Los Angeles and San Diego metro areas, phone (844) 919-2035. Tell us whether you saw F8E2 or F8E3 and that the breaker reset has been done, and give the model number.
Source: KitchenAid Product Help, Wall Oven: Error Code or Message; KitchenAid Product Help, Ranges: Error Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.