F4E2 narrows a KitchenAid fault to the microwave: sensor/thermistor, appliance manager or wiring. Reset the breaker first.
Model compatibility: KitchenAid reuses codes across series and model years, so F4E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Possible problem with the Microwave Sensor/Thermistor, the Microwave Appliance Manager or its wiring.
The short version
KitchenAid names three things for F4E2: the microwave sensor/thermistor, the microwave appliance manager, and the wiring. Compared with the vaguer F4E1, this one is clearly about the microwave.
At a glance
| Code | F4E2 |
|---|---|
| What it means | Possible problem with the Microwave Sensor/Thermistor, the Microwave Appliance Manager or its wiring. |
| What you can check | Turn the wall oven's breaker off and let sixty seconds go by. Restore power, stay near the oven for another minute and look for F4E2, then run the oven to see that it behaves. |
| When to call a technician | Should F4E2 come back after the reset, phone a technician and quote the code as displayed. Leave the microwave compartment's electronics closed. |
The suspects, in the manufacturer’s order
| Order | Part | Plain description |
|---|---|---|
| 1 | Microwave sensor/thermistor | Generally something that senses heat; KitchenAid prints it as one slashed item, not two parts |
| 2 | Microwave appliance manager | KitchenAid’s name for the control serving the microwave portion |
| 3 | Wiring | Connections tied to those parts |
What you can do
Turn the wall oven’s breaker off and let sixty seconds go by. Restore power, then stay near the oven for another minute and look for F4E2 returning. Finally, run the oven to see that it behaves.
What the entry leaves out
This code’s entry is only a parts list followed by a single reset. It does not show where the sensor is or how to check it without opening anything, and the microwave compartment’s electronics should stay closed. Should F4E2 come back, phone a technician and quote it as displayed.
Is the sensor probably the problem?
The three candidates come unranked, so only testing can say.
Other codes in the F4E family
- F4E3: the exhaust air sensor, also on the microwave side
- F4E6: a sensor on the wave guide
- F4E1: pairs a thermistor with the appliance manager
Wall oven repair across our metro areas
We handle KitchenAid wall oven calls in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 919-2035, say F4E2 is on the display, and describe what the breaker reset did. The oven repair page lists what to have ready, such as the model number.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.