A loose meat probe or an unplugged roll-out rack attachment can trigger F3E4 on a KitchenAid wall oven. Checks and reset inside.
Model compatibility: KitchenAid reuses codes across series and model years, so F3E4 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid ties F3E4 to a dislocated meat probe or a roll-out rack power attachment, depending on the model.
What F3E4 points to
Unlike most wall oven codes, F3E4 sends you first to things you can touch. KitchenAid ties it to a dislocated meat probe or, on some models, a roll-out rack power attachment. Which one fits your oven depends on the model number.
At a glance
| Code | F3E4 |
|---|---|
| What it means | KitchenAid ties F3E4 to a dislocated meat probe or a roll-out rack power attachment, depending on the model. |
| What you can check | If you were using the meat probe, push it fully into its receptacle. If a roll-out rack was in use, roll it out, check its power attachment, then push it back until you hear a tone. Then reset the breaker for one minute. |
| When to call a technician | If F3E4 is still there after the probe, the rack and the breaker reset have all been tried, arrange service. Tell the technician which accessory you were using. |
Were you using the meat probe?
Look at how far the probe is inserted. It needs to go fully into the probe receptacle. KitchenAid notes that the receptacle sits in different places from model to model, and its owner’s manual has the exact spot and the instructions. Push the probe in all the way and watch whether the message clears.
Was the rack’s power attachment in use?
On models with a roll-out rack that has a power attachment, KitchenAid says the attachment may have come unplugged if it was in use as the code showed up. Follow these steps:
- Roll the rack out of the oven.
- Check that the power attachment is correctly in place.
- Firmly push the roll-out rack back in. You will hear a tone once it is seated.
Breaker reset
If F3E4 is still there after both checks, use the reset in KitchenAid’s list. Turn off the oven’s circuit breaker for one minute, turn it on, and monitor the oven for a further minute to make sure the code stays away. Then operate the oven in the usual way.
Still returning
Once the probe is seated, the rack is in place and the reset is done, KitchenAid’s article gives an owner nothing more to try. Arrange service, and let the technician know which accessory you were using.
Related codes
- F4E7: this is the meat probe in the microwave, a distinct part with different resistance values.
- 3D31 / 3D32 / 3D41: the meat probe is not securely in its receptacle.
Oven repair in the metro areas we cover
For KitchenAid wall oven repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 919-2035. Tell us whether the probe or the roll-out rack was in use at the time, and which model you have. See the oven repair page as well.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.