The probe is not firmly seated in its receptacle. KitchenAid lists reseating the probe and a one-minute breaker reset for 3D31, 3D32 and 3D41.
Model compatibility: KitchenAid reuses codes across series and model years, so 3D31 / 3D32 / 3D41 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Meat probe not securely inserted in its receptacle on a wall oven.
Short version
Push the meat probe fully into its receptacle, reset the oven at the breaker, and see whether the code leaves. KitchenAid’s help page attributes 3D31, 3D32 and 3D41 to a probe that is not securely inserted in the receptacle.
At a glance
| Code | 3D31 / 3D32 / 3D41 |
|---|---|
| What it means | The meat probe is not securely inserted in its receptacle on a wall oven. |
| What you can check | Push the meat probe fully into its receptacle; your owner's manual shows where it is. Then turn the breaker off for a minute, back on, and watch for the code for about a minute. |
| When to call a technician | If nothing changes after reseating the probe and resetting, schedule service. A qualified technician may be required. |
Details
Where is the receptacle? It may differ by oven. KitchenAid sends you to the owner’s manual for your model.
Do the codes differ? Not in the source. It states no distinction among the three, so one routine fits all.
| Code | Stated reason |
|---|---|
| 3D31 | Probe not securely inserted |
| 3D32 | Probe not securely inserted |
| 3D41 | Probe not securely inserted |
Is this a temperature or heating problem? The explanation is about seating, so it concerns the probe connection. It is not described as a heating or temperature fault.
Power reset after reseating
- Breaker off, then wait a minute.
- Breaker on.
- Spend about a minute watching for 3D31, 3D32 or 3D41.
- Run the oven to make sure it operates.
Apart from reseating the probe, this reset is all the article lists.
If nothing changes
KitchenAid says to contact or schedule service. In the 3D31 article, it adds that a qualified technician may be required. No cause other than seating is given.
Related probe entries
- F3E4: depending on the model, a dislocated probe or roll-out rack power attachment
- F4E7: the microwave meat probe or its receptacle
Oven service in our metro areas
We take calls for the Miami, New York, Houston, Los Angeles and San Diego metro areas at (844) 919-2035. Give the code, the oven model and a note that the probe was reinserted and the breaker cycled. More is on the oven repair page.
Source: KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.