FCE8 is a setup message: KitchenAid asks about the SAID number, appliance type and model number.
Model compatibility: KitchenAid reuses codes across series and model years, so FCE8 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
FCE8 is a connected-appliance registration error from a wrong appliance type or model number, or a SAID entered incorrectly, per KitchenAid.
Not a hardware code
Within the FCE group, FCE8 stands apart. It names a “Registration Error” met while setting up the connected-appliance features, so no part, router or signal level is blamed.
At a glance
| Code | FCE8 |
|---|---|
| What it means | A connected-appliance registration error from a wrong appliance type or model entry, or an incorrectly entered SAID. |
| What you can check | Re-enter the SAID number carefully, and confirm you picked the correct appliance type and model during registration. No power reset applies, since the fix lies in the setup data. |
| When to call a technician | No hardware step is described for FCE8. If both entries are correct and the error remains, call for help and mention the values you entered. |
Two questions from KitchenAid
- Is the SAID number right? Typing it incorrectly triggers the error, and the help says to try entering it again.
- Were the appliance type and model number picked correctly? You choose these first during registration, and an incorrect pick brings up the same error.
Why you will not find a reset
Because nothing in the entry faults the appliance, a power reset is not offered. The correction lies in the data entered during setup.
Where to find the SAID
The entry refers to a “SAID Location” part of KitchenAid’s troubleshooting guide. We do not copy it here.
Frequently asked
Does the oven keep heating with FCE8 on screen?
The entry is silent on cooking and speaks only of the registration error.
What if everything was entered correctly the second time?
The entry stops at the two checks and a pointer to the connected-appliance help line. It describes no range repair, so there is no hardware step.
Related Wi-Fi codes
| Code | Topic |
|---|---|
| FCE7 | No link from Wi-Fi module to internet |
| FCE1 to FCE3 | Could not connect to the router |
Range help in our metro areas
For a visit, call (844) 919-2035 from the Miami, New York, Houston, Los Angeles or San Diego metro area. Mention the SAID, type and model values you entered at registration; the range repair page shows what we do.
Source: KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Wall Oven: Error Code or Message; KitchenAid Product Help, Over-the-Range Microwave: Error Code
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.