F1E0 has reset steps on commercial-style pages, an oven control entry on the range page and an EEPROM tech-sheet line.
Model compatibility: KitchenAid reuses codes across series and model years, so F1E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Reset steps are published; one page names the oven control or wiring, and a technician sheet describes an EEPROM communication error.
KitchenAid has three entries for F1E0. They do not conflict; each simply offers a different amount of information.
At a glance
| Code | F1E0 |
|---|---|
| What it means | The oven control cannot complete a startup check; a memory communication error, or an oven control or wiring problem. |
| What you can check | For a commercial-style range, set the temperature knob to OFF to cancel the error. If it persists, cut power for five minutes, or use the one-minute breaker reset and watch for a minute. |
| When to call a technician | If F1E0 outlasts both resets, a technician should check the oven control and its wiring. Mention which reset you tried and whether the knob step helped. |
Source by source
- Commercial-style range pages: a set of reset steps and no cause.
- Range page: the oven control or the wiring may have a problem.
- Technician sheet (electric range and oven controls): the line reads “EEPROM communication error”. EEPROM is a memory chip type, and the entry has no extra explanation.
For a commercial-style range
Begin with the temperature knob: set it to OFF. This, KitchenAid says, cancels the error so use of the range can resume. If the code persists, two resets are published:
- Cut power for five minutes, unplugging the range or switching off its breaker, then bring power back.
- Or switch the breaker off for a minute, restart the cycle, and monitor for one minute to see if F1E0 returns.
Answers in brief
- Is OFF on the knob a fix? It cancels the error; a persisting code moves you to the power reset.
- Why five minutes? That is what the owner page gives for the long reset, while the blinking-lights page lists a one-minute breaker version.
Still showing
If F1E0 outlasts both resets, a technician should check the oven control and its wiring. The pages suggest nothing further for homeowners.
Neighbor codes
- F1E1: a nearly matching reset-only entry.
- F1E5: oven control or wiring and a sensor-out-of-range remark.
Range service in the metro areas we cover
For KitchenAid ranges in the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 919-2035 if F1E0 shows up again. Let us know which reset you tried and whether the knob step helped.
Source: KitchenAid Product Help, Commercial-Style Range: Error Codes; KitchenAid Product Help, Ranges: Error Codes; KitchenAid Tech Sheet W11393917 Rev B
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.