KitchenAid KRBL130SPS Bottom-Freezer Refrigerator
Bottom-freezer refrigerator — model notes, common issues and related KitchenAid refrigerator service.
Model overview
When a technician arrives at a home with a KitchenAid KRBL130SPS, the first questions tend to be about timing and symptoms. Have ready when the fresh-food side began running warm, whether the freezer frost came back after thawing and if the ice maker produced any cubes overnight. Say where the water appeared, since a puddle under the cabinet points somewhere different than moisture inside the drawer. Mention anything that changed recently, such as moving the unit, cleaning behind it or swapping a filter. Bottom-freezer cabinets route cold air in a particular way, so these details help the diagnosis along. Clients booking across Miami, New York, Houston, Los Angeles and San Diego can jot them down ahead. In the booking form, add the model KRBL130SPS and the one symptom that bothers you most.
At a glance
| Model | KRBL130SPS |
|---|---|
| Appliance | bottom-freezer refrigerator |
| Common symptoms | warm fresh-food side, freezer frost returning after thawing, no ice overnight, water under the cabinet or inside the drawer |
| What you can check | Note when the fresh-food side began running warm, whether frost came back after thawing, and exactly where the water appeared. Mention any recent move, cleaning or filter swap. |
| When to call a technician | Book a technician when the warmth, frost or missing ice persists or water keeps appearing. Tell them the one symptom that bothers you most so the visit starts in the right place. |
KRBL130SPS is a KitchenAid bottom-freezer refrigerator. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking, because a single letter can change parts.
Specifications
| Capacity | Nominal storage capacity is 19 cu. ft. |
|---|---|
| Power | The specification sheet lists 120 V, 60 Hz and 15 A. |
| Installation | Allow 1/2 inch at the sides and top and 1 inch behind for ventilation. |
| Features | The refrigerator uses the Preserva food-care system. A full-width pantry drawer provides additional fresh-food storage. Interior lighting uses LEDs. Framed spill-resistant shelves have metallic accents. |
| Finish | The listed stainless finish is PrintShield. |
What sets the KRBL130SPS apart
Its left-swing refrigerator door is the detail that sets this configuration apart, and the optional ice-maker kit is not included by default. The full-width pantry drawer gives wide produce and bottled items a dedicated place in the fresh-food section, while the 19 cu. ft. nominal capacity covers both compartments. For an owner, the practical result is a bottom-freezer kitchen layout that works best when the door swing and the ice-maker decision are settled before installation.
Service notes for the KRBL130SPS
Start with the ice or water question, because a left-swing door does not change where the water supply connects, and the ice-maker kit is a separate part. If the fresh-food section runs warm while the freezer holds temperature, a technician checks the damper and the fan path to the fresh-food side. Frost on the freezer walls and water under the unit usually point to the defrost and drain path, so note both symptoms together. Before the visit, the owner can confirm the door seals close fully, that the unit has 1/2 inch of space at the sides and top and 1 inch behind, and that the 120 V, 60 Hz, 15 A outlet has power. Those checks help a technician focus on the right part of the system. The full number on the rating label has extra letters past the base, so copy it whole when booking.
Common issues for this model
- Ice maker or dispenser not working
- Fresh-food section not cooling to the set temperature
- Freezer frosting up or not holding temperature
- Water leaking inside or under the unit
Related error codes
KitchenAid Undercounter Codes E1 and E2: Power Cycle Only
KitchenAid undercounter units can show E1 or E2; its help gives a power cycle and does not name a cause.
KitchenAid Refrigerator F3E1 to F8EC Error Codes
Thirteen refrigerator codes share a single KitchenAid entry with no cause stated. Reset the power, confirm cooling, then arrange service if needed.
KitchenAid Refrigerator / Beverage Center Code CL / LO: Temperature Too Low
A KitchenAid beverage center showing CL (or LO) reports that its internal temperature is too low.
KitchenAid Refrigerator Flashing F Code: What It Means
The flashing F on KitchenAid refrigerators is a general fault flag. Power-cycle the unit, verify cooling is on, and arrange service if the F persists.
Recommended repair service
Refrigerator Repair
Losing cooling, building frost, or pooling water? We diagnose KitchenAid refrigerator faults and restore reliable, efficient cooling.
Troubleshooting resources
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Frequently asked questions
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note how long the temperature has been off and whether the freezer side is affected too.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.