Thirteen refrigerator codes share a single KitchenAid entry with no cause stated. Reset the power, confirm cooling, then arrange service if needed.
Model compatibility: KitchenAid reuses codes across series and model years, so F3E1 / F3E2 / F3E4 / F3E8 … may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F-prefixed fault codes for which KitchenAid states no cause, only reset and service instructions.
One entry, thirteen codes
These are the codes KitchenAid lists with the same text on its French door bottom freezer refrigerator page: F3E1, F3E2, F3E4, F3E8, F3E9, F3EC, F4E1, F6E1, F8E1, F8E2, F8E3, F8E8 and F8EC. The source offers no cause and no part for any of them. The display may show a flashing F.
At a glance
| Code | F3E1 / F3E2 / F3E4 / F3E8 … |
|---|---|
| What it means | F-prefixed fault codes with no stated cause. |
| What you can check | Disconnect the refrigerator from power at the breaker or outlet and let a minute pass. Restore power, make sure the cooling function is turned on, then wait a minute and see if the code returns. |
| When to call a technician | Schedule service if the code reappears after the reset. Quote the exact code, say what you tried, and keep the model number handy. |
| Prefix | Codes |
|---|---|
| F3E | F3E1, F3E2, F3E4, F3E8, F3E9, F3EC |
| F4E | F4E1 |
| F6E | F6E1 |
| F8E | F8E1, F8E2, F8E3, F8E8, F8EC |
What to do
Begin by disconnecting the refrigerator from power, whether at the breaker or at the outlet, and let a minute pass. Plug it back in or switch the breaker on. Next, see that the cooling function is turned on. Finally, wait a minute and note if the code reappears. KitchenAid says to schedule service when it does.
Reading the digits
The wording is identical for every code, and none is tied to a sensor, a fan or any other part. The sequence above is the whole instruction.
Reason for the cooling check
KitchenAid’s Cooling Off light article says that when cooling is off, COOLING OFF appears on the screen and the refrigerator and freezer do not cool.
Related entries
- Flashing F: the broader fault indication, with the same reset
- PO: not a fault; it reports a past power outage
Where we handle refrigerator repair
Customers in the Miami, New York, Houston, Los Angeles and San Diego metro areas can call (844) 919-2035 when one of these codes persists. Quote the exact code, say what you tried, and keep the model number handy. Our refrigerator repair page describes the rest.
Source: KitchenAid Product Help, French Door Bottom Freezer Refrigerator: Control Concerns
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.