KitchenAid Dishwasher F2E2 Code: Main Control Communication Error
F2E2 means a main control communication error to KitchenAid. A 30-second power-off is the owner step; service follows if it returns.
Model compatibility: KitchenAid reuses codes across series and model years, so F2E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F2E2 is listed by KitchenAid as a main control communication error.
On KitchenAid’s dishwasher help page, F2E2 has one entry: “Main Control Communication Error.” The page expands on it only with a reset.
At a glance
| Code | F2E2 |
|---|---|
| What it means | F2E2 is a communication error at the dishwasher's main control. |
| What you can check | Switch off power to the dishwasher for 30 seconds: pull the plug, or turn off the breaker at the panel if it is hard wired. Then restore power and see if F2E2 returns. |
| When to call a technician | If F2E2 comes up again after the reset, schedule service. Have the code ready and say you tried the 30-second power cycle. |
What “communication” refers to here
Inside a dishwasher with electronic controls, parts hand signals to each other. When one of those signals fails to arrive, or arrives garbled, that is a communication error. The page never says which parts are involved or what wiring they use, so the exact place is unknown.
The reset, step by step
- Switch off power to the dishwasher and leave it off for 30 seconds. A plug is simply pulled from the outlet; a hard-wired unit needs its breaker switched off at the electrical panel.
- Restore power.
- If F2E2 comes up again, KitchenAid wants you to schedule service.
KitchenAid compares the restart to rebooting a computer, which can sometimes sort out a problem.
Related codes
Questions people ask
Same thing as F1E2?
The cause wording matches, but the two are separate entries.
More than one reset?
The instruction is a single cycle of 30 seconds.
Can I clear a cycle that is stuck?
The source does not address it.
Dishwasher repair across our metro service areas
For a KitchenAid dishwasher in the Miami, New York, Houston, Los Angeles or San Diego metro areas, call (844) 919-2035 if F2E2 keeps returning. Have the code ready and mention that you tried the 30-second power cycle.
Source: KitchenAid Product Help, Dishwasher Error Code or Flashing Lights
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.