KitchenAid Induction Cooktop Codes E90-E93, E_4-E_8, E_13, E_22, E_35
A dozen KitchenAid induction codes get the same two instructions, reset at the breaker and cool down. No cause is stated for any.
Model compatibility: KitchenAid reuses codes across series and model years, so E90 / E91 / E92 / E93 … may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The source names no fault for these induction cooktop codes and gives only a power reset and a cool-down.
A dozen induction cooktop codes each have a KitchenAid article, and every article repeats the same text without naming any fault. They are gathered here since the advice never changes from one to the next.
At a glance
| Code | E90 / E91 / E92 / E93 … |
|---|---|
| What it means | Several induction cooktop codes with no named fault; the only advice is a breaker reset and a cool-down. |
| What you can check | Switch the cooktop's circuit breaker off for one minute, then back on. Do not use the cooktop until it has cooled, and watch it for a minute to see whether the code returns. |
| When to call a technician | Once the reset and cool-down fail, no further owner step exists, so arrange service. Tell the technician exactly which of the twelve codes appears on the display. |
Code table
| Group | Members |
|---|---|
| Three-digit E9 codes | E90, E91, E92, E93 |
| Single-digit E_ codes | E_4, E_5, E_6, E_7, E_8 |
| Two-digit E_ codes | E_13, E_22, E_35 |
Recovery as KitchenAid words it
- Cut power at the cooktop’s circuit breaker and hold it off one minute.
- Restore power at the breaker.
- Do not use the cooktop again until it has cooled.
- Monitor it for a minute for the code, then verify normal operation.
What you will not find in the articles
Not one of these articles says what part sets off the code. Compared with the E_2, E_3 and E_03 pages, they also leave out any cookware test, any wiping of the control panel and any look at how the unit was installed.
A code that persists
Once the reset and cool-down fail to clear the display, the support content has nothing left to offer. Write down exactly which of the twelve is showing, because each has its own entry at KitchenAid even though the instructions match, and then arrange service.
Where to read more
- E_2: overheating, with a cookware check.
- E_21, E_9, E_A, E_H: internal electronics temperature too high.
- F0E1: cookware material and pot size.
Induction cooktop repair in our metro areas
Customers around Miami, New York, Houston, Los Angeles and San Diego can reach us at (844) 919-2035 for KitchenAid induction cooktop service. Have the code and your model number at hand, and say that the breaker reset has been tried.
Source: KitchenAid Product Help, Induction Cooktops: Error Code or Indicator Light
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.