KitchenAid Cooktop E2 Error Code
E2 means the induction zone does not detect a compatible pan — either no cookware is on the zone, it is off-center, or the cookware is not ferromagnetic.…
Decode from KitchenAid Sensor Induction Cooktop Error Code or Indicator Light documentation.
E2 means the induction zone does not detect a compatible pan — either no cookware is on the zone, it is off-center, or the cookware is not ferromagnetic.…
Model compatibility: KitchenAid reuses codes across series and model years, so E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
E2 means the induction zone does not detect a compatible pan — either no cookware is on the zone, it is off-center, or the cookware is not ferromagnetic. Per KitchenAid guidance, only pans made from enameled steel, cast iron, or induction-suitable stainless steel will work; a magnet should stick firmly to a compatible pan's base. Turn off the circuit breaker(s) for one minute, then restore power. Wait for the cooktop to cool before using it again and monitor for a minute to confirm the code does not return. If the code returns after a reset, contact KitchenAid authorized service.
Symptoms you may notice
- E2 displayed, or the pan-detection indicator flashes
- The zone will not heat even though it is switched on
- The zone may work with one pan but not another
Possible causes
- No pan, or an off-center pan, on the cooking zone
- Cookware made from a non-ferromagnetic material (aluminum, copper, glass, plain stainless)
- A pan whose base is only partly ferromagnetic
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Center the pan fully on the cooking zone
- Check the pan base with a magnet — it should stick firmly for induction use
- Switch to a different induction-compatible pan or zone
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
- Do not adjust, disconnect or repair any gas connection or valve
When to call a technician
If E2 persists after the safe checks above, contact KitchenAid authorized service with your model and serial numbers.
Likely related component
Pan detection sensor
Frequently asked questions
Share the KitchenAid model and symptom (mixer hum, fridge warm-up, range ignition, and so on). We confirm a metro appointment window, diagnose on site, then give a written estimate you approve before any parts go in.
Yes. After diagnosis you get an upfront estimate. No KitchenAid parts are ordered or installed until you approve — including sealed-system or gas work when those apply.
Yes. We use original manufacturer parts matched to your model. We confirm the part and cost with you before anything is ordered or installed.
No. Sealed refrigeration, gas valves, and live control boards are technician-only. Safe homeowner checks stop at filters, seals, approved descaling, and what your model manual lists as user-serviceable.
We serve the Miami, New York, Houston, Los Angeles and San Diego metro areas for KitchenAid appliance repair. Contact us with your ZIP code to confirm coverage.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.