KitchenAid KBSD748S Built-in Side-by-Side Refrigerator
Built-in side-by-side owners most often report a freezer that frosts over, water under the cabinet or ice dispenser trouble.
Model overview
The KitchenAid KBSD748S is a built-in side-by-side refrigerator with 29.4 cubic feet of total storage and a FreshChill drawer for temperature-controlled food. Installed height is 83 1/4 inches with the legs in the guide's base position, and the width without trims is 47 3/16 inches. Across the metro areas we cover, owners see freezer frost, water under the cabinet and dispenser trouble. For the booking form, give the symptom, the full model number from the rating label and the install position, since clearances change with the position chosen.
At a glance
| Model | KBSD748S |
|---|---|
| Appliance | 48-inch built-in side-by-side refrigerator |
| Common symptoms | freezer frosting up or not holding temperature; water leaking inside or under the unit; fresh-food section not cooling to the set temperature; ice maker or dispenser not working |
| What you can check | Note how long the temperature has been off and whether the freezer side is affected too. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Dimensions | Installed overall height is 83 1/4 inches with legs in the guide’s base position. Installed overall width without trims is 47 3/16 inches. |
|---|---|
| Capacity | Total storage capacity is 29.4 cubic feet. |
| Installation | Flush installation uses a maximum door swing of 110 degrees. Leave 3/4 inch above the top grille for removal and installation. |
| Features | The under-shelf prep area includes bakeware. Doors have a soft self-closing mechanism. A FreshChill drawer provides temperature-controlled storage. |
What sets the KBSD748S apart
The three installation positions and the self-closing doors set the KBSD748SPS apart. The model supports flush, overlay and standard installation, and each position has its own clearance in the dimension guide. Flush installation uses a maximum door swing of 110 degrees, and the doors have a soft self-closing mechanism. The under-shelf prep area includes bakeware, which gives the owner a workspace inside the cabinet.
Service notes for the KBSD748S
A freezer that frosts over or a fresh-food side that will not hold its set temperature points a technician to the airflow and the defrost path, and the FreshChill drawer is one place to check the temperature. Water inside or under the unit is traced to the drain and the ice maker supply. Ice maker or dispenser problems are checked at the supply line and the dispenser, and the owner should note whether the trouble starts after a door is opened. Installation clearance matters for repair access: leave 3/4 inch above the top grille so it can be removed and reinstalled, which the technician needs. Soft self-closing doors that stop closing should be described by door. The family base is followed by letters on the rating label, so copy the complete string.
The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking, because a single letter can change parts.
Common issues for this model
- Freezer frosting up or not holding temperature
- Water leaking inside or under the unit
- Fresh-food section not cooling to the set temperature
- Ice maker or dispenser not working
Related error codes
KitchenAid Refrigerator Flashing F Code: What It Means
The flashing F on KitchenAid refrigerators is a general fault flag. Power-cycle the unit, verify cooling is on, and arrange service if the F persists.
KitchenAid Undercounter Codes E1 and E2: Power Cycle Only
KitchenAid undercounter units can show E1 or E2; its help gives a power cycle and does not name a cause.
KitchenAid Refrigerator F3E1 to F8EC Error Codes
Thirteen refrigerator codes share a single KitchenAid entry with no cause stated. Reset the power, confirm cooling, then arrange service if needed.
KitchenAid Refrigerator H2O Light: Filter Status and Reset
H2O is a filter reminder, not a breakdown. Put in a new water filter, then hold the reset buttons to clear the light.
Recommended repair service
Refrigerator Repair
Losing cooling, building frost, or pooling water? We diagnose KitchenAid refrigerator faults and restore reliable, efficient cooling.
Troubleshooting resources
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Frequently asked questions
Total storage capacity is 29.4 cubic feet, and the installed width without trims is 47 3/16 inches.
A flush installation uses a maximum door swing of 110 degrees, and the model supports flush, overlay and standard positions.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.