KitchenAid KDTM504E Dishwasher
24" dishwasher — model notes, common issues and related KitchenAid dishwasher service.
Model overview
Busy households that run the machine every night are the ones who usually rely on a 24-inch KitchenAid dishwasher like the KDTM504E to finish a full load. Those owners notice quickly when a cycle stops early, when the door latch feels stiff or when glasses come out spotted. Small faults such as water left in the tub can grow into bigger problems if they go unreported. Tell the technician how often the machine runs and whether the sound changed before the stop. A short written summary helps the visit. In the booking form, list the symptom, type KDTM504E and mention which cycle you were running.
At a glance
| Model | KDTM504E |
|---|---|
| Appliance | 24-inch dishwasher |
| Common symptoms | cycle stopping early, stiff door latch, spotted glasses, water left in the tub |
| What you can check | Note which cycle was running, how often the machine runs, and whether the sound changed before the stop. A short written summary helps the visit. |
| When to call a technician | Small faults such as water in the tub can grow if ignored, so book a technician when a cycle keeps stopping early, the latch stays stiff, or glasses keep coming out spotted. |
KDTM504E is a KitchenAid 24″ dishwasher. The model number is printed on the rating label, usually on the edge of the door or the side of the tub, visible when the door is open; match it letter for letter before booking, because a single letter can change parts.
Common issues for this model
- Cycle stops early or will not start
- Door latch or control panel problems
- Dishes not getting clean or dry
- Water left in the tub after the cycle
Related error codes
KitchenAid Dishwasher F5E2 Code: Door Switch Stuck Closed
KitchenAid's F5E2 reads door stuck closed: the door switch never opened between cycles, or its contacts are stuck in the closed state.
KitchenAid Dishwasher F6E1 Code: Control Error or Inlet Water
F6E1 is read two ways by KitchenAid: a main control error cleared by power cycling, or a low or no inlet water problem in service tables.
KitchenAid Dishwasher FAE5 / F10E5 Code: Diverter Leak
FAE5 / F10E5 points to a diverter leak. KitchenAid suggests checking for water, tightening connections and pressing Cancel twice.
KitchenAid Dishwasher F8E5 Code: Stuck Open Fill Valve
F8E5 points to a fill valve stuck open. KitchenAid's listed steps stop the water and handle the alarm.
Recommended repair service
Dishwasher Repair
Dishwasher not draining, not cleaning, or showing an error code? We find the cause and get your KitchenAid dishwasher back to spotless cycles.
Troubleshooting resources
Note the cycle used, whether water is left in the tub, and any code or flashing light.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Frequently asked questions
Check the rating label on the edge of the door or the side of the tub, visible when the door is open. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note the cycle used, whether water is left in the tub, and any code or flashing light.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.