FC E4 refers to the wiring link between the touchpad and Induction Module. The published fix is a one-minute breaker reset.
Model compatibility: KitchenAid reuses codes across series and model years, so FCE4 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid lists a possible problem with the harness connecting the touchpad to the Induction Module.
Here is how KitchenAid explains FC E4: the cause could be the harness that connects the cooktop’s touchpad with its Induction Module. Picture a bundle of wires with a plug at each end, which tells you the code is about a link, not one dead part.
At a glance
| Code | FCE4 |
|---|---|
| What it means | A possible problem with the wire harness connecting the touchpad to the Induction Module. |
| What you can check | Turn the breaker off for one minute, on again, watch for a minute, and test normal operation. Do not take the cooktop apart, unplug anything or check the harness yourself. |
| When to call a technician | If FC E4 outlasts a complete reset, a qualified technician may be needed, since work beneath the cooktop is not for owners. Give the code exactly as shown. |
Comparing the FC codes
| Code | Named by KitchenAid |
|---|---|
| FC E0 | Power feed, wiring or the module |
| FC E1 | Control panel and its wires |
| FC E4 | Wire bundle joining panel and module |
The only thing an owner does
KitchenAid prescribes the same power reset it uses across its cooktop codes. In order: breaker off for one minute; breaker on; watch for a minute; test normal operation of the cooktop.
Taking the cooktop apart, disconnecting a plug or checking the harness is nowhere advised by the source, and a live appliance makes it unsafe.
What if it keeps coming back?
A qualified technician may be needed, the shared electric-and-induction page admits. Treat a code that outlasts a complete reset in that way.
FAQ
Is wire harness work something I can do?
Not according to KitchenAid, whose sole owner step is the reset. Work beneath the cooktop is left to a qualified technician.
Does FC E4 prove the touchpad failed?
No. The text singles out the harness lying between those two parts, not either end of it.
KitchenAid cooktop repair in our metro areas
Living in the Miami, New York, Houston, Los Angeles or San Diego area? Call (844) 919-2035 to arrange help with FCE4. Tell us the code as shown, and that the breaker reset has been done. More on cooktop repair.
Source: KitchenAid Product Help, Electric Cooktop Error Code or Indicator Light
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.