KitchenAid KRFF507HPS Refrigerator
French-door refrigerator — model reference for identification and compatibility.
Model overview
KitchenAid French-door refrigerator. Common cooling and dispenser issues are listed below with related repair options.
At a glance
| Model | KRFF507HPS |
|---|---|
| Appliance | French-door refrigerator |
| Common symptoms | cooling problems, dispenser issues, warm compartments |
| What you can check | No owner steps are given for this refrigerator, so note which compartment feels warm and whether the dispenser or the cooling is the main complaint before the visit. |
| When to call a technician | Call a technician when cooling or dispenser trouble persists. The related repair options for this refrigerator cover cooling and dispenser parts that call for a service visit. |
Specifications
| Dimensions | The feature sheet lists overall width as 35 11/16 inches. |
|---|---|
| Capacity | The qualifying-product list records 27.1 cubic feet of storage for KRFF507H**0*. |
| Power | The installation section requires grounded 115 V, 60 Hz power protected at 15 A or 20 A. |
| Features | A pull-out tray provides space for serving platters. The full-width FreshChill pantry has temperature control. Interior illumination uses LEDs. Cooling uses a single evaporator. |
| Controls | Temperature settings use touch controls. |
What sets the KRFF507HPS apart
Standard-depth French-door refrigerators with an exterior dispenser look close in outline, so the features that matter are the pantry and the tray. This model adds a full-width FreshChill pantry with its own temperature setting and a pull-out tray for serving platters. The exterior ice-and-water dispenser is the other practical difference. Day to day, the pantry keeps cold items at a setting of their own, separate from the main section.
Service notes for the KRFF507HPS
When the fresh-food side drifts or the pantry will not hold its setting, a technician checks the door seals, the single evaporator and the airflow between the main section and the pantry. Because the pantry is temperature controlled, a warm pantry with a cold main section points to its damper or sensor rather than the compressor. An exterior dispenser that stops is usually the water valve, the filter or the ice maker fill line, and the owner can safely confirm the water supply is on and the dispenser lever is pressed fully. The full number on the rating label has extra letters or digits, so copy it whole when booking. Unplug the unit before moving it for any inspection.
Common issues for this model
- Cooling drift in one compartment
- Ice maker not producing
- Water dispenser not responding
Related error codes
KitchenAid Refrigerator H2O Light: Filter Status and Reset
H2O is a filter reminder, not a breakdown. Put in a new water filter, then hold the reset buttons to clear the light.
Recommended repair service
Refrigerator Repair
Losing cooling, building frost, or pooling water? We diagnose KitchenAid refrigerator faults and restore reliable, efficient cooling.
Troubleshooting resources
Confirm the model and check airflow before booking.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Frequently asked questions
Share the KitchenAid model and symptom (mixer hum, fridge warm-up, range ignition, and so on). We confirm a metro appointment window, diagnose on site, then give a written estimate you approve before any parts go in.
Yes. After diagnosis you get an upfront estimate. No KitchenAid parts are ordered or installed until you approve — including sealed-system or gas work when those apply.
Yes. We use original manufacturer parts matched to your model. We confirm the part and cost with you before anything is ordered or installed.
No. Sealed refrigeration, gas valves, and live control boards are technician-only. Safe homeowner checks stop at filters, seals, approved descaling, and what your model manual lists as user-serviceable.
We serve the Miami, New York, Houston, Los Angeles and San Diego metro areas for KitchenAid appliance repair. Contact us with your ZIP code to confirm coverage.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.