KitchenAid Oven FCLR Error Code
A KitchenAid oven raising FCLR deserves a calm read of door latch clues — not a rush to open sealed or live panels.
Reviewed for clarity on KitchenAid appliances; always match the code to your specific model.
FCLR on KitchenAid oven appliances often means Door latch.
Model compatibility: KitchenAid reuses codes across series and model years, so FCLR may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Oven latch/release related code. Treat this as plain-language guidance for KitchenAid owners, not a substitute for model-specific service literature.
Symptoms you may notice
- The oven shows FCLR and the door won’t lock or release
- The cycle won’t start while FCLR is displayed
- The door behaves unexpectedly with FCLR
Possible causes
- A door-lock mechanism or interlock
- An obstruction or alignment issue at the door
- A control signal to the lock
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Confirm nothing is obstructing the door
- Check the door closes and latches cleanly
- Allow the appliance to cool if it was hot, then retry
- Write down when FCLR appeared and which cycle or mode was running
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
- Do not adjust, disconnect or repair any gas connection or valve
When to call a technician
Persistent FCLR after one careful reset is a technician visit. Artisan Repair serves KitchenAid appliances as an independent repair shop.
Likely related component
door lock or interlock
Frequently asked questions
Oven latch/release related code.
One breaker reset is reasonable. Recurring FCLR means the fault is still present — do not keep resetting without checks.
No — KitchenAid control generations differ. Match FCLR to your exact documentation.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.