Oven sensor circuit trouble: E61 reports an open, E62 and E63 report a short. KitchenAid lists the sensor, board and wiring.
Model compatibility: KitchenAid reuses codes across series and model years, so E61 / E62 / E63 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The oven sensor circuit reported an open (E61) or a short (E62, E63); possible sensor, control board or wiring problem.
Three numbers, two fault types
These codes concern the oven sensor circuit of a KitchenAid microwave. E61 is the open one, and the shorted ones are E62 and E63. Whichever you see, KitchenAid lists the sensor, the appliance control board and the connecting wiring as where trouble may sit.
At a glance
| Code | E61 / E62 / E63 |
|---|---|
| What it means | The oven sensor circuit reported an open (E61) or a short (E62, E63); possible sensor, control board or wiring problem. |
| What you can check | Switch the microwave breaker off for a minute and back on, then stay nearby for a minute to see whether any of the three codes comes back. Run it to confirm normal operation. |
| When to call a technician | If a code returns, schedule a service visit. Tell the technician exactly which one appeared, because the open code and the shorted codes are described differently. |
| Code | Type of fault sent to the control board |
|---|---|
| E61 | Open |
| E62 | Short |
| E63 | Short |
Plain meanings
Think of an open circuit as a gap in the electrical route: nothing arrives from the sensor. A short is the other way around, with current finding a shortcut it was never meant to use. KitchenAid names no specific sensor and does not explain why E62 and E63 both exist.
Where the trouble may be
- In the sensor
- On the control board
- In the wires between the two
“May be a problem” is the phrase in the article; no cause is confirmed.
Reset steps
- Switch off the microwave’s breaker(s) and wait a minute.
- Switch them on.
- Stay near the unit for a minute, checking whether any of the three codes returns.
- Use the microwave to confirm normal operation.
A code that comes back leaves only the article’s last option, a service appointment.
Compare with
For thermal sensor circuit reports see E21 and E22, and for an overheat entry that lists sensors among its causes see E24.
Keeping notes
Record which of the three appeared, plus the date and what the reset did. A technician will want the exact code, since E61 and E62/E63 are described differently.
Microwave repair in our five metro areas
For KitchenAid microwave repair across the Miami, New York, Houston, Los Angeles and San Diego metro areas, phone (844) 919-2035. Have the code, model number and reset outcome ready.
Source: KitchenAid Product Help, Over-the-Range Microwave Error Code
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.