The right rear hotplate is behind FC RR. Try the manufacturer's one-minute breaker reset, then arrange service if it stays.
Model compatibility: KitchenAid reuses codes across series and model years, so FCRR may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid lists a possible problem with the right rear hotplate (cooking surface, burner or element) or its wiring.
Meaning of FC RR
This code is about the rear burner position on the right. KitchenAid reports that the hotplate there (a cooking surface, burner or element) or its wiring may be faulty. A hedge like that means something at the position was detected, with no proof as to which part is at fault.
At a glance
| Code | FCRR |
|---|---|
| What it means | A possible problem with the right rear hotplate (surface, burner or element) or its wiring. |
| What you can check | At the panel, turn the breaker or breakers off for about a minute, then back on. Watch for sixty seconds to see that FC RR stays off the display, and confirm normal operation. |
| When to call a technician | If FC RR persists, a qualified technician may be needed. Do not pull the cooktop out of the counter to look underneath; tell them which burner was in use when the code appeared. |
Compare with the other positions
Reset procedure
- At the panel, turn the cooktop’s breaker or breakers off.
- After roughly a minute, turn them on again.
- Keep watching for sixty seconds; FC RR must stay off the display.
- Confirm normal operation.
When more is needed
A qualified technician’s assistance may be necessary, KitchenAid says on the combined electric and induction page. Do not pull the cooktop out of the counter to inspect underneath.
FAQ
Does FC RR equal FC RF?
The two read alike, each naming one burner spot plus wiring, yet they stand for different spots.
Why does KitchenAid hedge with “may be”?
Because only testing can say which item failed. The cooktop merely reports a possible problem there.
How long should the breaker stay off?
For one minute. Then restore it and observe for another minute.
Cooktop repair in Miami, New York, Houston, Los Angeles and San Diego
If FCRR persists, call (844) 919-2035; we work in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Say which burner was in use when the code appeared. Read about cooktop repair before you ring if you like.
Source: KitchenAid Product Help, Electric Cooktop Error Code or Indicator Light
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.