KitchenAid Washing Machine F0E0 Error Code
KitchenAid washing machine owners see F0E0 when washer control is in play. Use this guide, then schedule independent diagnosis with Artisan Repair if it returns.
KitchenAid homeowner guide language only — not a factory service procedure.
KitchenAid washing machine code F0E0: Washer control — verify on your tech sheet.
Model compatibility: KitchenAid reuses codes across series and model years, so F0E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Washer control/sensor family code — confirm against your model tech sheet. If your manual lists a different description for this code, trust the manual over any general summary.
Symptoms you may notice
- The washing machine displays F0E0 during operation
- F0E0 appears without an obvious cause
- The washing machine behaves inconsistently with F0E0 shown
Possible causes
- A sensor reading out of range
- A wiring or connection issue
- A control interpreting the reading as a fault
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Confirm the appliance has stable power
- Check for visible blockages or obstructions
- Record the full model number
- Record the full KitchenAid model and serial numbers before contacting a technician
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
When F0E0 keeps returning, stop DIY inside the cabinet and schedule Artisan Repair — bring photos of the display and rating label.
Likely related component
a sensor
Frequently asked questions
Washer control/sensor family code — confirm against your model tech sheet.
Clearing the display is not the same as fixing the cause. If F0E0 comes back, schedule diagnosis.
Not reliably. Two similar KitchenAid displays can map F0E0 differently by series.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.