KitchenAid Oven MODEL ERROR
MODEL ERROR on a KitchenAid oven means an incorrect model number has been installed in the control, according to the manufacturer error-handling guide.
Definition from KitchenAid use & care manual Error Handling (MODEL ERROR).
MODEL ERROR — incorrect model number installed in control (KitchenAid manual).
Model compatibility: KitchenAid reuses codes across series and model years, so MODEL ERROR may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Per the KitchenAid use & care manual, MODEL ERROR means an incorrect model number has been installed. Contact a KitchenAid dealer or authorized service agency.
Symptoms you may notice
- Display shows MODEL ERROR
- May appear after control board replacement or service
- Oven may not operate normally until corrected
Possible causes
- Control board not programmed/configured for this model
- Incorrect replacement control for the appliance
- Service configuration issue (requires authorized technician)
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Record model and serial numbers
- Note any recent service or board replacement
- Contact authorized service — programming is a technician task
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you ever smell gas, stop immediately, do not operate any switches, leave the area and contact your gas provider and a qualified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
- Do not adjust, disconnect or repair any gas connection or valve
When to call a technician
Contact a KitchenAid dealer or authorized service agency when MODEL ERROR appears, especially after parts replacement.
Likely related component
Electronic oven control (model configuration)
Frequently asked questions
The manual states an incorrect model number was installed — the replacement control likely needs proper configuration by authorized service.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.