KitchenAid Oven RTD ERROR
RTD ERROR on a KitchenAid oven means the resistance temperature detector (RTD) circuit is open or shorted, according to the manufacturer error-handling guide.
Text and owner action copied from KitchenAid use & care manual Error Handling (RTD ERROR).
RTD ERROR — the oven RTD (temperature detector) circuit is open or shorted per KitchenAid documentation.
Model compatibility: KitchenAid reuses codes across series and model years, so RTD ERROR may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Per the KitchenAid use & care manual Error Handling section, RTD ERROR indicates the RTD is open or shorted. The manual directs you to contact a KitchenAid dealer or authorized service agency rather than attempt internal repair.
Symptoms you may notice
- Display shows RTD ERROR
- Oven may not heat or hold temperature correctly
- Fault may appear during preheat or cooking modes
Possible causes
- Open or shorted RTD probe or wiring (per manufacturer message)
- Connector or harness fault at the sensor
- Control detecting an out-of-range RTD reading
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Record model and serial numbers from the rating label
- Allow the oven to cool if it was recently hot
- Contact a KitchenAid dealer or authorized service agency as the manual directs
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you ever smell gas, stop immediately, do not operate any switches, leave the area and contact your gas provider and a qualified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
- Do not adjust, disconnect or repair any gas connection or valve
When to call a technician
Follow the manual: call a KitchenAid dealer or authorized service agency when RTD ERROR is displayed. Do not use the oven for normal cooking until the RTD circuit is diagnosed.
Likely related component
Oven RTD (temperature) sensor and its wiring
Frequently asked questions
The manual does not describe an owner repair — it directs you to authorized service for RTD open/short conditions.
KitchenAid ovens and ranges use Whirlpool-family electronic oven controls (EOC) across several generations; the exact fault behind a given F#E# pair can vary slightly by model and control generation. Record your model and serial numbers and confirm against your appliance documentation.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.