E_2 signals an overheated induction cooktop. Empty pans and non-induction cookware are the items KitchenAid lists, followed by a breaker reset.
Model compatibility: KitchenAid reuses codes across series and model years, so E_2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The control switches off because of excessive internal temperature of the electronics; an empty pan can trigger it.
On KitchenAid induction cooktops, E_2 (also E2 in some listings) tells you the unit is too hot. Internal electronics temperature has risen too high and the control panel has switched itself off. The article’s first line of advice: let the cooktop cool before the next use.
At a glance
| Code | E_2 |
|---|---|
| What it means | The control switches off because of excessive internal temperature of the electronics; an empty pan can trigger it. |
| What you can check | Let the cooktop cool, then make sure the pan is not empty and is made for induction. Turn the breaker off for a minute, restore it, and watch for the code to stay away. |
| When to call a technician | If E_2 remains after the cooldown, pan checks and breaker reset, arrange service. Describe the pan material and whether it held food or liquid. |
What KitchenAid says, in two parts
There are two separate articles for E_2. They do not stress the same thing.
- Empty pan. Starting the cooktop with an empty pot or pan on a cooking area may bring up the code. Switch the burner off, remove the pan, add food or liquid, put it back on the cooking area, and start the cooktop.
- Cookware type. Pots and pans should be ferromagnetic and suited to induction.
Materials
| Works | Does not work |
|---|---|
| Enameled steel, cast iron, stainless steel designed for induction cooking | Glass, ceramic, copper, aluminum, stainless steel not designed for induction |
A magnet shows if a pot is magnetic. The stated base diameter may not equal the diameter of the ferromagnetic section, KitchenAid warns, and a base made mainly from non-ferromagnetic material may not be recognized, which means the zone may not switch on.
Finishing with a reset
Each article closes with the same sequence. Turn the breaker off for one minute, turn it on, let the cooktop cool, monitor it for a minute, and verify normal operation.
Neighboring codes
- E_3: the identical overheat message, with a pot-size check on top.
- E_21 and related: overheat with no cookware check.
- F0E1: the cookware-suitability message that is cleared by pressing On/Off twice.
Short Q and A
Does the page name a failed part?
It does not; it mentions heat, the empty pan and cookware type only.
Can a suitable pan cause E_2?
Per the first article it can, if the pan is empty when the cooktop starts.
Induction cooktop service across several metros
For E_2 that remains after the checks above, (844) 919-2035 connects you with us for KitchenAid induction cooktop repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Describe the pan material and whether it held food or liquid.
Source: KitchenAid Product Help, Induction Cooktops: Error Code or Indicator Light
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.