KitchenAid Washing Machine F02 Error Code
A long-drain fault: if draining has not completed within the control's allotted time (about eight minutes), the water valves are shut off and a drain error is flashed.…
Washer fault decode from KitchenAid washer documentation and Whirlpool-family front-load control literature.
A long-drain fault: if draining has not completed within the control's allotted time (about eight minutes), the water valves are shut off and a drain error is flashed.…
Model compatibility: KitchenAid reuses codes across series and model years, so F02 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
A long-drain fault: if draining has not completed within the control's allotted time (about eight minutes), the water valves are shut off and a drain error is flashed. "Sud" may appear first, followed by this code if draining still does not complete. If the problem persists after a reset, contact a KitchenAid authorized service agency with your model and serial numbers.
Symptoms you may notice
- A long-drain fault code on the display, sometimes preceded by "Sud"
- Standing water in the drum at the end of a cycle
- The pump may run continuously without clearing the water
Possible causes
- A kinked or clogged drain hose
- A clogged drain-pump filter (small items, lint, coins)
- A failed or obstructed drain pump
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Check the drain hose for kinks or blockages
- Clean the drain-pump filter of foreign objects if your model has an accessible one
- Select Pause/Cancel twice to clear the display, then retry
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
If F02 persists after the safe checks above, contact KitchenAid authorized service with your model and serial numbers.
Likely related component
Drain pump / drain path
Frequently asked questions
Share the KitchenAid model and symptom (mixer hum, fridge warm-up, range ignition, and so on). We confirm a metro appointment window, diagnose on site, then give a written estimate you approve before any parts go in.
Yes. After diagnosis you get an upfront estimate. No KitchenAid parts are ordered or installed until you approve — including sealed-system or gas work when those apply.
Yes. We use original manufacturer parts matched to your model. We confirm the part and cost with you before anything is ordered or installed.
No. Sealed refrigeration, gas valves, and live control boards are technician-only. Safe homeowner checks stop at filters, seals, approved descaling, and what your model manual lists as user-serviceable.
We serve the Miami, New York, Houston, Los Angeles and San Diego metro areas for KitchenAid appliance repair. Contact us with your ZIP code to confirm coverage.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.