KitchenAid KSF22C4 Standard-Depth Side-by-Side Refrigerator
33-inch-class side-by-side with a flush dispenser; owners often report leaks under the unit or frost in the freezer.
Model overview
The KitchenAid KSF22C4 is a 33-inch-class side-by-side refrigerator, and the December 2013 manufacturer guide lists a 22 cubic-foot size. Its cabinet measures 32 3/4 inches wide and 34 5/8 inches deep including the handles. FreshChill temperature management and a FreshVue door bin with a humidity-retaining area handle the food, and the flush ice-and-water dispenser uses Light-Touch controls. The unit needs a grounded 115 V, 60 Hz supply and a cold-water line carrying 30 to 120 psi. Across the metro areas we serve, owners raise leaks, dispenser faults and freezer frost most. Add the symptom, the complete model number and any code to the booking form.
At a glance
| Model | KSF22C4 |
|---|---|
| Appliance | 33-inch standard-depth side-by-side refrigerator |
| Common symptoms | water leaking inside or under the unit; ice maker or dispenser not working; freezer frosting up or not holding temperature; compressor or fan running loud or nonstop |
| What you can check | Note how long the temperature has been off and whether the freezer side is affected too. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Dimensions | Cabinet width is 32 3/4 inches. Depth including handles is 34 5/8 inches. |
|---|---|
| Capacity | The December 2013 factory guide lists a 22-cu.-ft. model size. |
| Power | A grounded 115 V, 60 Hz AC supply with a 15- or 20-amp fuse is required. |
| Installation | The cold-water supply must provide 30–120 psi. |
| Features | FreshChill temperature management is provided. A FreshVue door bin provides a humidity-retaining storage area. |
| Controls | The ice and water dispenser has Light-Touch controls. |
What sets the KSF22C4 apart
A standard-depth cabinet keeps a flat front line rather than sticking out past the counter. The FreshVue bin holds a humidity-retaining zone in the door, and the Light-Touch controls sit on the dispenser panel where they are easy to find. That keeps the footprint shallow in a row of cabinets, and the flush dispenser is the feature a visitor notices first.
Service notes for the KSF22C4
Leaks inside or under the unit, a dispenser that stops and freezer frost usually share a first check of the water feed and the defrost path. A technician tests the water pressure against the 30 to 120 psi range and the inlet valve before the ice maker. Frost in the freezer points to the door seal or the defrost system, and compressor noise often starts in the fan. Owners can confirm the cold-water line is open, look for standing water at the front base and check that the door seals close evenly.
The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking, because a single letter can change parts.
Common issues for this model
- Water leaking inside or under the unit
- Ice maker or dispenser not working
- Freezer frosting up or not holding temperature
- Compressor or fan running loud or nonstop
Related error codes
KitchenAid Refrigerator PO Error Code Explained
PO is KitchenAid's outage indicator for refrigerators. Freezer temperature reached 18F (-8C) or higher; MEASURED FILL under Confirm acknowledges it.
KitchenAid Refrigerator / Beverage Center Code CL / LO: Temperature Too Low
A KitchenAid beverage center showing CL (or LO) reports that its internal temperature is too low.
KitchenAid Refrigerator Flashing F Code: What It Means
The flashing F on KitchenAid refrigerators is a general fault flag. Power-cycle the unit, verify cooling is on, and arrange service if the F persists.
KitchenAid Refrigerator H2O Light: Filter Status and Reset
H2O is a filter reminder, not a breakdown. Put in a new water filter, then hold the reset buttons to clear the light.
Recommended repair service
Refrigerator Repair
Losing cooling, building frost, or pooling water? We diagnose KitchenAid refrigerator faults and restore reliable, efficient cooling.
Troubleshooting resources
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Frequently asked questions
A grounded 115 V, 60 Hz AC supply with a 15- or 20-amp fuse.
The cold-water supply must provide 30 to 120 psi.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.