KitchenAid KERS306 Freestanding Electric Range
Freestanding electric range where uneven baking, a slow oven or a backguard control panel fault shows up.
Model overview
The KitchenAid KERS306 is a freestanding electric range with an oven of 6.2 cu. ft. and five radiant cooktop elements. The overall width is 29 7/8 inches, and Even-Heat convection moves air through the oven for more even results. AquaLift uses water and low heat to loosen oven spills, which is a cleaning step rather than a cooking one. Glass-touch backguard controls run the cooking functions, and the display includes a control-lock setting. A built-in warming drawer keeps finished dishes warm. Owners across the metro areas we cover should note whether the oven or the cooktop is affected before booking. For the booking form, give the full model number from the rating label, which oven or element is failing and any code shown.
At a glance
| Model | KERS306 |
|---|---|
| Appliance | 30-inch freestanding electric range |
| Common symptoms | uneven baking or broiling; oven not reaching or holding temperature; convection fan or oven light not working; control panel or knob problems |
| What you can check | Note whether the problem is on the cooktop, the oven, or both, and the fuel type. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Dimensions | Overall width is 29 7/8 inches. |
|---|---|
| Capacity | Oven capacity is 6.2 cu. ft. |
| Features | The cooktop has five radiant elements. Even-Heat convection distributes heat through the oven. A built-in warming drawer keeps food warm. |
| Controls | Glass-touch backguard controls operate cooking functions. The display includes a control-lock function. |
| Care | AquaLift uses water and low heat to loosen oven spills. |
What sets the KERS306 apart
Freestanding electric ranges in this class are compared by oven size, cooktop layout and how the controls are set. This one puts the controls on the backguard and uses five radiant elements, with a warming drawer built into the same unit. The AquaLift cleaning step is a practical difference when spills dry in the cavity. Day to day, the owner uses the control lock to keep the panel from changing settings during a cook.
Service notes for the KERS306
When baking is uneven or the oven will not reach temperature, a technician checks the bake and broil elements, the oven sensor and the convection fan before the control board. A convection fan or oven light that fails may be a motor or socket issue, and the owner can safely check the bulb first. An uneven bake can also come from the rack position or a door that does not seal, so the owner should note which rack was used. Control panel faults on the backguard are often a loose connector or a stuck button behind the glass. Before service, the owner can switch the control lock off and check the display. Turn off power at the breaker before pulling the range out.
The model number is printed on the rating label, usually on the frame behind the storage or warming drawer, or around the oven door opening; match it letter for letter before booking, because a single letter can change parts.
Common issues for this model
- Uneven baking or broiling
- Oven not reaching or holding temperature
- Convection fan or oven light not working
- Control panel or knob problems
Related error codes
KitchenAid Range Code FEE6: Main Cavity Bake Element
A KitchenAid range showing FEE6: the main oven bake element or its wiring may need attention.
KitchenAid Range F7E0 Code: Latch Assembly or Wiring
KitchenAid ties F7E0 to the oven door latch assembly or wiring only, and gives a breaker reset as the one owner step.
KitchenAid Range F1E7 Code: Appliance Control Board
Appliance control board or wiring is the listed cause of F1E7, and the tech sheet notes a PCB thermistor open or shorted.
KitchenAid Range Code FCE8: Registration Error Explained
FCE8 is a setup message: KitchenAid asks about the SAID number, appliance type and model number.
Recommended repair service
Professional Range Repair
KitchenAid commercial-style range not igniting, heating unevenly, or showing an error? We diagnose gas and dual-fuel range faults with a safety-first approach.
Troubleshooting resources
Note whether the problem is on the cooktop, the oven, or both, and the fuel type.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Frequently asked questions
The oven capacity is 6.2 cu. ft., with Even-Heat convection circulating heat through the cavity.
Yes, a built-in warming drawer keeps food warm.
Check the rating label on the frame behind the storage or warming drawer, or around the oven door opening. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.