KitchenAid KECC056RBL Two-Element Radiant Electric Cooktop
Two-element radiant cooktop where the touch controls flicker, lock out or show an error on one element.
Model overview
The KitchenAid KECC056RBL is a compact electric cooktop with two radiant elements under a frameless ceramic glass surface. The rear element is rated 1,800 W and the front element 1,200 W, and hot-surface indicators stay lit until the glass cools. The unit measures 21.31 inches deep and 3.06 inches high, so the depth is worth checking against the counter before a visit. It needs a 240 V, 60 Hz supply on a 20-amp circuit. Owners across the metro areas we cover should confirm that circuit first. For the booking form, give the full model number from the rating label, which element or control will not respond and any code shown.
At a glance
| Model | KECC056RBL |
|---|---|
| Appliance | 15-inch two-element radiant electric cooktop |
| Common symptoms | touch controls flicker or lock out; error code on one zone |
| What you can check | Note which burner or zone fails and whether the others still work normally. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Dimensions | Depth is 21.31 inches. Height is 3.06 inches. |
|---|---|
| Power | The rear element is rated at 1,800 W. The front element is rated at 1,200 W. The electrical specification is 240 V, 60 Hz and 20 amps. |
| Features | The cooking surface is frameless ceramic glass. Two radiant cooking elements are provided. |
| Controls | Two hot-surface indicators are provided. |
What sets the KECC056RBL apart
Compact two-element radiant cooktops differ mainly in element size and power rating. This one pairs an 8-inch rear element at 1,800 W with a 7-inch front element at 1,200 W, giving a stronger back and a gentler front. The frameless glass leaves no metal trim to clean around. Day to day, the rear element handles boiling and the front one handles simmering.
Service notes for the KECC056RBL
A control that flickers or locks out usually traces to the touch panel, its overlay or moisture under the glass, so a technician checks those first. The owner can safely wipe the surface dry, clear spills from the control area and let the glass cool before testing again. An error code on one zone points to that element or its sensor, so report the code with the position. Hot-surface indicators that stay lit after use are normal and fade as the glass cools. A 240 V, 20-amp supply is required, so a cooktop that will not run at all should be checked at the breaker before anything else. Disconnect power before lifting the cooktop from its cabinet.
The model number is printed on the rating label, usually on the underside of the unit; many owners also have it on the warranty card or installation papers; match it letter for letter before booking, because a single letter can change parts.
Common issues for this model
- Touch controls flicker or lock out
- Error code on one zone
Related error codes
KitchenAid Cooktop Code F2E1: Dirty Keys or Control Fault
For F2E1 KitchenAid asks about contamination on the keys first, then a control or wiring problem.
KitchenAid Cooktop dE Code (Demo Mode On)
A dE display means demo mode. The help pages describe holding the Booster key for 5 seconds shortly after power is connected.
KitchenAid Cooktop Code F25: Power Supply to the Cooktop
F25 flags a power supply problem. Reset the breaker once; for a repeat KitchenAid says to contact a qualified electrician.
KitchenAid Cooktop Code F40: Possible Touchpad or Power Board Fault
F40 points to the touchpad, the power control board or the wiring. A breaker reset is the single listed owner step.
Recommended repair service
Cooktop Repair
Induction or electric cooktop not heating or responding? We diagnose KitchenAid cooktop faults safely and precisely.
Troubleshooting resources
Note which burner or zone fails and whether the others still work normally.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Frequently asked questions
The rear element is rated 1,800 W, and the front element is rated 1,200 W.
It needs a 240 V, 60 Hz supply on a 20-amp circuit.
Check the rating label on the underside of the unit; many owners also have it on the warranty card or installation papers. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.