KitchenAid KUDR204KPA Panel-Ready Double-Drawer Refrigerator
Panel-ready double-drawer owners most often ask about compressor noise, drawer frost and water under the unit.
Model overview
The KitchenAid KUDR204KPA is a panel-ready undercounter unit 23 7/8 inches wide, and it fits a minimum opening of 24 inches wide, 24 inches deep and 34 1/2 inches high. Two refrigerated drawers take the place of the usual refrigerator and freezer pair, and it runs on 115 V, 60 Hz power from a grounded three-prong outlet. The custom panel is what makes it blend with cabinetry, so the install is part of any repair story too. Across the metro areas we cover, owners who hear a loud compressor or see frost in a drawer should describe it. For the booking form, add the symptom, the full model number from the rating label and any alarm or code shown.
At a glance
| Model | KUDR204KPA |
|---|---|
| Appliance | 24-inch panel-ready double-drawer refrigerator |
| Common symptoms | compressor or fan running loud or nonstop; freezer frosting up or not holding temperature; ice maker or dispenser not working; water leaking inside or under the unit |
| What you can check | Note how long the temperature has been off and whether the freezer side is affected too. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Dimensions | Product width is 23 7/8 inches. |
|---|---|
| Power | Requires 115-V, 60-Hz AC power. Requires a 15-A or 20-A fused supply. |
| Installation | Minimum opening width is 24 inches. Minimum opening depth is 24 inches. Minimum opening height is 34 1/2 inches. Requires a grounded three-prong outlet. |
| Features | Provides two refrigerated drawers. |
What sets the KUDR204KPA apart
Two refrigerated drawers in place of a refrigerator and freezer pair set the KUDR204KPA apart. The unit is designed for panel-ready installation, so a custom front and handle cover the cabinet face, and a 15-A or 20-A fused supply is required for the circuit. Owners who expect a conventional freezer compartment should plan around drawer storage instead, which changes how food is loaded and how temperature is judged day to day.
Service notes for the KUDR204KPA
A loud or nonstop compressor is a cooling-system question, and the technician will ask whether the noise is a steady hum, a fan or a rattle, since both drawers share one cabinet. Ice maker or dispenser complaints are not part of this model's listed facts, so confirm the model before booking that symptom. Water under the unit often comes from a defrost drain or a loose connection, so note whether the puddle sits at the front or back. Before the visit, check the outlet voltage, make sure the custom panel is not pressing on the cabinet, and leave room for air to move. Frost inside a drawer is worth describing with the drawer name and the temperature shown on the controls. The model family has color or version letters past this base, so copy the full rating-label number whole.
The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking, because a single letter can change parts.
Common issues for this model
- Compressor or fan running loud or nonstop
- Freezer frosting up or not holding temperature
- Ice maker or dispenser not working
- Water leaking inside or under the unit
Related error codes
KitchenAid Refrigerator / Beverage Center Code CL / LO: Temperature Too Low
A KitchenAid beverage center showing CL (or LO) reports that its internal temperature is too low.
KitchenAid Refrigerator H2O Light: Filter Status and Reset
H2O is a filter reminder, not a breakdown. Put in a new water filter, then hold the reset buttons to clear the light.
KitchenAid Refrigerator PO Error Code Explained
PO is KitchenAid's outage indicator for refrigerators. Freezer temperature reached 18F (-8C) or higher; MEASURED FILL under Confirm acknowledges it.
KitchenAid Refrigerator Flashing F Code: What It Means
The flashing F on KitchenAid refrigerators is a general fault flag. Power-cycle the unit, verify cooling is on, and arrange service if the F persists.
Recommended repair service
Refrigerator Repair
Losing cooling, building frost, or pooling water? We diagnose KitchenAid refrigerator faults and restore reliable, efficient cooling.
Troubleshooting resources
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Frequently asked questions
It requires 115-V, 60-Hz AC power on a 15-A or 20-A fused supply, plus a grounded three-prong outlet.
The minimum opening is 24 inches wide, 24 inches deep and 34 1/2 inches high, and the product itself is 23 7/8 inches wide.
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Copy every letter and digit, including the ones at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.