KitchenAid KODE507ESS21 Wall Oven
27" wall oven — model notes, common issues and related KitchenAid oven service.
Model overview
Every preheat, every door opening and every long bake adds a little wear to a wall oven, and the 27-inch KitchenAid KODE507ESS21 is no exception. Families who bake several times a week tend to be the first to notice a door lock that sticks after a cleaning cycle or a light that flickers. Repeated heat cycling can also make an oven slow to reach its setting over time. Keep a note of when the code appeared and which cycle was running, since the pattern often shows in that sequence. Those details let a technician match the complaint to the right part without taking the cabinet apart. In the booking form, type KODE507ESS21, the symptom in your own words and any code on the screen.
At a glance
| Model | KODE507ESS21 |
|---|---|
| Appliance | 27-inch wall oven |
| Common symptoms | door lock sticking after cleaning, flickering light, slow preheat, code on the screen |
| What you can check | Note when the code appeared and which cycle was running, since the order of events often shows the pattern. Copy any code on the screen as shown. |
| When to call a technician | Set up a service visit if the door lock keeps sticking, the light keeps flickering, or the oven stays slow to reach its setting. Matching the complaint to the right part does not need the cabinet taken apart by you. |
KODE507ESS21 is a KitchenAid 27″ wall oven. The model number is printed on the rating label, usually on the frame around the door opening, visible with the door open; match it letter for letter before booking, because a single letter can change parts.
Specifications
| Capacity | Each oven in the KODE507E family has 4.3 cu. ft. capacity. |
|---|---|
| Power | The family specification requires 240 V and 40 A. |
| Features | Both ovens provide Even-Heat True Convection. Temperature probes are provided for both ovens. Both ovens have SatinGlide roll-out racks. The model parts catalog lists a high-limit thermostat. |
| Controls | The glass-touch display includes control lock. |
| Care | Adjustable self-cleaning cycles are provided. |
What sets the KODE507ESS21 apart
The KODE507ESS21 belongs to the KODE507E family of 4.3-cubic-foot double wall ovens, with a high-limit thermostat and temperature probes in both cavities. Each oven has SatinGlide roll-out racks and Even-Heat True Convection, and adjustable self-clean cycles are included. The family specification also requires 240 V and 40 A, so the electrical circuit is part of any replacement plan.
Service notes for the KODE507ESS21
Double wall ovens with probes and convection are easiest to diagnose when you know which cavity is misbehaving, so note the upper and lower positions before calling. A door lock that will not release after self-clean needs time, so wait until both cavities cool. An oven that is not heating or is slow to preheat often traces to the bake element or the high-limit thermostat, which the technician tests. A fan, light or display fault can be a bulb or a connector behind the control panel. Temperature off from the setting is a calibration question for the technician. Keep the displayed code and the label digits at hand.
Common issues for this model
- Error code on the control panel
- Door lock stuck after self-clean
- Fan, light or display not working
- Oven not heating or slow to preheat
Related error codes
KitchenAid Wall Oven F4E6 Code: Wave Guide Temperature Sensor
F4E6 is about the microwave wave guide temperature sensor or its wiring. A breaker reset is the only owner step listed.
KitchenAid Wall Oven F4E3 Code: Exhaust Air Sensor
F4E3 is a short KitchenAid entry: the microwave exhaust air temperature sensor or wiring. Reset the breaker, then call if needed.
KitchenAid Wall Oven F1E0 Code: Touchpad, Control, Wiring
F1E0 on a KitchenAid wall oven refers to the touchpad (user interface), the control or the wiring. A breaker reset is the listed step.
KitchenAid Wall Oven Code F1E6: Microwave Sensor
F1E6 on a KitchenAid combination oven: the microwave thermistor or sensor may be the issue, and a breaker reset comes first.
Recommended repair service
Oven Repair
Oven not heating, uneven baking, or showing an error? We diagnose KitchenAid oven faults with a safety-first approach.
Troubleshooting resources
Note the mode used (bake, convection, steam, self-clean) and any code on the display.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Frequently asked questions
Check the rating label on the frame around the door opening, visible with the door open. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note the mode used (bake, convection, steam, self-clean) and any code on the display.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.