KitchenAid KDTE304LPA Dishwasher
24" dishwasher — model notes, common issues and related KitchenAid dishwasher service.
Model overview
Dishwashers look alike from the front, yet the KitchenAid KDTE304LPA carries its own wash pump, door latch and drain settings, and the model number is the quickest way to sort them out. A 24-inch unit built this way can leave water in the tub, fail to dry dishes or throw a leak code, and each symptom points to a different part of the drain or heating path. Giving the technician the number before they arrive lets them check the matching parts list rather than work from a generic one. Door latch and control panel complaints also depend on the exact board. Customers in the metro areas we serve who include the number on the form give the crew a head start. In the booking form, type KDTE304LPA, describe what the dishes look like after the cycle and copy any code from the display.
At a glance
| Model | KDTE304LPA |
|---|---|
| Appliance | 24-inch dishwasher |
| Common symptoms | water left in the tub, dishes not drying, leak code, door latch trouble, control panel complaints |
| What you can check | Read the model number from the rating label on the door edge or tub side, look at how the dishes turn out, and copy any code from the display. |
| When to call a technician | A technician is the next step for standing water, a leak code, a door latch that fails, or a dead control panel, since those involve the pump, drain or board for this exact model. |
KDTE304LPA is a KitchenAid 24″ dishwasher. The model number is printed on the rating label, usually on the edge of the door or the side of the tub, visible when the door is open; match it letter for letter before booking, because a single letter can change parts.
Specifications
| Dimensions | Nominal dishwasher size is 24 inches. |
|---|---|
| Features | Rated sound level is 39 dBA. A third-level rack holds utensils. The middle rack adjusts between two positions. Drying uses a fan and heating element. The third-level rack is removable. |
| Controls | Controls use Tap Touch buttons. |
| Finish | The door accepts a custom cabinet panel. |
What sets the KDTE304LPA apart
The KDTE304LPA takes a custom cabinet panel on its door and runs at 39 dBA. A removable third-level rack holds utensils, and the middle rack adjusts between two positions for tall or wide dishes. Tap Touch buttons control the cycles, and a fan with a heating element handles drying after the wash, so the panel blends with the rest of the cabinetry.
Service notes for the KDTE304LPA
Dishwashers with a panel-ready door can be hard to check because the door hides the controls, so an owner should note the panel code before any work starts. Dishes that come out wet are often a drying issue, and a utensil rack can block the spray if utensils stand upright. Water left in the tub calls for a clear drain filter and a check of the hose. Tap Touch buttons that stop responding may point to a connector behind the panel. A leak code points to the base. The custom panel adds weight, so a technician will check the door hinge too. Share the label digits and the code when you book.
Common issues for this model
- Dishes not getting clean or dry
- Door latch or control panel problems
- Water left in the tub after the cycle
- Leak or leak-protection code
Related error codes
KitchenAid Dishwasher F3E1 Code: Thermistor Circuit Open
F3E1: KitchenAid's service documents call it an open thermistor/OWI sensor circuit. Three causes are listed and no owner fix is given.
KitchenAid Dishwasher Code F1E1: Control Module
F1E1 is the control module code. The manufacturer's remedy is a 30-second power cycle, with service if the code comes back.
KitchenAid Dishwasher F3E3 Code: Thermistor/OWI Calibration
F3E3 is a failed thermistor/OWI calibration; the listed causes are an OWI failure or a drain hose check valve letting dirty water back in.
KitchenAid Dishwasher F5E2 Code: Door Switch Stuck Closed
KitchenAid's F5E2 reads door stuck closed: the door switch never opened between cycles, or its contacts are stuck in the closed state.
Recommended repair service
Dishwasher Repair
Dishwasher not draining, not cleaning, or showing an error code? We find the cause and get your KitchenAid dishwasher back to spotless cycles.
Troubleshooting resources
Note the cycle used, whether water is left in the tub, and any code or flashing light.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Frequently asked questions
Check the rating label on the edge of the door or the side of the tub, visible when the door is open. Use the full number, including any letters at the end.
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Note the cycle used, whether water is left in the tub, and any code or flashing light.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.