F2Q1 flags the touchpad (user interface) or its wiring. KitchenAid's entry is brief: a power reset and service.
Model compatibility: KitchenAid reuses codes across series and model years, so F2Q1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
A possible touchpad (user interface) or wiring problem.
The touchpad is the subject of F2Q1 on KitchenAid over-the-range microwaves: the user interface (touchpad) or its wiring may have a problem. That, along with a power reset, is the entire entry.
At a glance
| Code | F2Q1 |
|---|---|
| What it means | A possible touchpad (user interface) or wiring problem. |
| What you can check | Power reset first: breaker off for one minute and then back on. For the next minute keep looking for the code, and check that the microwave works. |
| When to call a technician | If F2Q1 comes back, schedule a service visit and say it is the touchpad code. Leave covers closed, because the panels are not for owners to service. |
KitchenAid’s reset
- Turn the breaker(s) for the microwave off for one minute.
- Turn power on again.
- For the next minute, keep looking for F2Q1.
- Check that the microwave works.
Gaps
You will not find the microwave’s behavior under this code, any word on touchpad response, or the type of wiring fault. There is also no cleaning or testing method for the touchpad. That limits an owner to the reset.
Choosing the next move
With no repeat of F2Q1, nothing more is needed. If the code comes back, KitchenAid’s page says to schedule service. Tell the technician it is the touchpad version, since F9Q1 (touch pad) and F2E1 (keypad) are close on paper.
One additional entry
Another keypad-related page is F2 and E03, where the keypad sends a problem report to the control board.
Worth writing down
- The code as displayed, with its letter Q
- Any additional message on the display
- When you cycled the breaker
The page says nothing more. Leave covers closed, because electronics and panels are not for owners to service.
F2Q1 repair across our metro areas
Ring (844) 919-2035 for KitchenAid microwave repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Say the breaker reset was done, and give the model number.
Source: KitchenAid Product Help, Over-the-Range Microwave Error Code
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.