KitchenAid Microwave F2 / E03 Code: Keypad Reported a Problem
Whether it reads F2 or E03, the message is that the keypad (user interface) reported a problem to the control board.
Model compatibility: KitchenAid reuses codes across series and model years, so F2 / E03 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The keypad (user interface) reported a problem to the control board; a keypad or wiring problem is possible.
One keypad message, two labels
F2 and E03 carry identical text in KitchenAid’s help for over-the-range microwaves. In it, the control board has been told by the keypad (user interface) that something is wrong. Either the keypad or its connecting wiring is suspected.
At a glance
| Code | F2 / E03 |
|---|---|
| What it means | The keypad (user interface) reported a problem to the control board; a keypad or wiring problem is possible. |
| What you can check | Switch the breaker off for a minute and back on, then watch for a minute to see whether the code returns. Test that the microwave operates. |
| When to call a technician | If F2 or E03 comes back, book a service visit. Keep a record of the dates and codes that appeared to hand over when you book. |
A touch-panel issue
The keypad, called the user interface, is the surface you press when giving the microwave orders. KitchenAid casts it as the sender of the report and the control board as the receiver. Nothing is said about checking buttons, wiping the panel or looking it over, and none of that is suggested.
Reset listed by KitchenAid
- Breaker off for a minute
- Breaker back on
- One minute of watching to see if F2 or E03 comes back
- Test that the microwave operates
Reading two codes as one
Both codes share one set of advice, so neither stands for a user mistake while the other stands for a part. A display that shows F2 today and E03 next week is giving the same keypad report. Keep a record of dates and codes to hand over when you book.
If the code returns
In the article, a repeat means service. Keep this pair apart from F2E1, F2Q1 and SE; each has a separate entry.
Microwave keypad repair across our metro areas
When the display still reads F2 or E03 after the reset, call (844) 919-2035 for KitchenAid microwave repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Name the code and give the model number.
Source: KitchenAid Product Help, Over-the-Range Microwave Error Code
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.