F4 is a placement code. KitchenAid says to center the cookware, keep hot items off the panel and wait five minutes.
Model compatibility: KitchenAid reuses codes across series and model years, so F4 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
A pot or pan is too close to the control panel.
What F4 means
Cookware has ended up too near the touch control panel. KitchenAid’s article is the same for electric cooktops and for combined electric and induction ones, and it deals with where the pot sits, not with any broken part.
At a glance
| Code | F4 |
|---|---|
| What it means | A pot or pan is too close to the control panel. |
| What you can check | Take the pot or pan off, check that cookware sits centered over the cooking area and nothing hot lies on the touch panel, then wait five minutes. If the code lingers, reset the breaker for a minute. |
| When to call a technician | If F4 persists with the pan well away from the panel, arrange service. Say how long you waited and where the pan was positioned. |
Quick reference
| Action | Detail |
|---|---|
| Check placement | Cookware centered over the cooking area; no hot object on the touch panel |
| Move it | Take the pot or pan off the cooktop |
| Wait | Five minutes while the panel clears |
If it lingers past five minutes
The article then relies on the power reset. Switch the breaker off for a minute, on again, observe the cooktop for a minute and check that it runs. A code that survives everything points past placement and toward service.
Keeping it from returning
Hold to two points in the instructions: centered cookware, and no hot items on the control panel. That panel is where the heat is set, which is why hot items there are the very situation F4 describes.
See also
Cooktop repair for the Miami, New York, Houston, Los Angeles and San Diego areas
If F4 persists with the pan nowhere near the panel, ring (844) 919-2035. Tell us how long you waited and where the pan was positioned. The cooktop repair page has more.
Source: KitchenAid Product Help, Electric Cooktop: Error Code or Indicator Light
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.