The electric article calls F0E4 a module communication error; the induction one names no cause and says to disconnect power and call.
Model compatibility: KitchenAid reuses codes across series and model years, so F0E4 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Internal communication error on the touch control module (electric); the induction listing advises a brief power disconnect and a service call if it persists.
Whether F0E4 means a module fault depends on which KitchenAid article applies. The electric cooktop article and the induction article word it differently, so they are kept apart.
At a glance
| Code | F0E4 |
|---|---|
| What it means | On an electric cooktop, an internal communication error on the touch control module; on an induction cooktop, no cause is stated. |
| What you can check | Turn off the circuit breaker or breakers for a minute, turn them back on and watch the cooktop for a minute. On an induction cooktop, disconnect power for a few seconds instead. |
| When to call a technician | If F0E4 stays after the reset, arrange a service visit and say whether the cooktop is radiant electric or induction, since the advice differs between the two types. |
Electric cooktop
An internal communication error on the touch control module is the stated meaning. To recover:
- Turn off the circuit breaker or breakers for a minute.
- Turn them back on.
- Monitor the cooktop for one minute for a repeat of F0E4.
- Verify normal operation.
Induction cooktop
No cause is stated here. KitchenAid tells you to take the cooktop off the power supply, wait a few seconds and put it back on. If the problem persists, call the service center with the error code from the display.
Summary table
| Type | Meaning given | Action given |
|---|---|---|
| Electric | Touch module communication error | Breaker off for a minute, then on |
| Induction | None | Disconnect, wait, reconnect; call if it persists |
Why the wording differs
On KitchenAid’s help site the electric and induction cooktops are filed in separate sections, each carrying its own F0E4 page. They were prepared for different products. Use the care guide to identify yours if unsure.
Codes to compare
- F03 and related: touch module communication, worded the same.
- F0E2 and related: induction codes with the same disconnect step.
Cooktop repair across our metro areas
Where F0E4 stays after the reset, call (844) 919-2035 to arrange KitchenAid cooktop repair in the Miami, New York, Houston, Los Angeles or San Diego metro area. We will want to know if the cooktop is radiant electric or induction.
Source: KitchenAid Product Help, Electric Cooktop: Error Code or Indicator Light; KitchenAid Product Help, Induction Cooktops: Error Code or Indicator Light
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.